One of the main functions of an air conditioning system is to remove unwanted particulates from indoor air such as allergens, toxins, bacteria, dust, and debris. To do this successfully, an AC system has to have a filter that is not dirty. To maintain proper AC system operation, it’s essential to change the filter about once a month. The following guidelines can help a person perform this ongoing task easily.
To enhance Air Conditioning in Franklin TN, a homeowner should ensure that the filter in his AC system is clean. A person can use a disposable filter or a reusable one. The filter’s compartment must first be located. This area is usually inside the return air duct or around the furnace. After finding it, a person should carefully remove the access panel and fasteners. These will have to be replaced after the filter change.
To change a disposable filter, a person should carefully remove the filter from its compartment. Removing a filter rapidly can cause contents on its surface to fly into the air. The dirty filter should be placed in a proper receptacle outside the home. A new filter will need to be inserted. There are usually arrows on a filter that will help with this insertion. When a filter has to be purchased, a homeowner can use the measurements on the older filter to buy a new one. When these measurements are not visible, a person can measure the height, width, and depth of the old filter to get a new one.
A reusable filter will need to be cleaned. This should be done outside to prevent dust from getting into indoor air. The hand attachment on a vacuum can be used to suck the majority of substances off the filter. After, a person can clean the rest off using a sponge and cleaning solution. A cleaning solution of one-gallon water and a few drops of dish soap. The filter should be rinsed thoroughly with a garden hose. After it dries, it should be reinserted into its compartment. For more information on Air Conditioning in Franklin TN, a person can Visit the website of Spring Hill Heating & Cooling, LLC.