Pages Menu
Categories Menu

Posted by on Jun 10, 2013 in Home Improvement |

Tips To Clean And Maintain Your Carpet In Beavercreek

The carpet in your house can say a lot about the cleanliness of your home. Most people don’t realize the dangerous amount of dirt, grime, pet dander, and other deposits that get embedded inside of carpets. Much of these deposits can greatly contribute to the development of various health issues. Many people develop allergies and respiratory issues because of the debris carpets collect. Every time you come home from the outside, you are bringing in all types of debris that sits in your carpet until it’s cleaned. This is why it’s important to thoroughly clean the Carpet Beavercreek offers as frequently as possible.

A generally rule to keeping the average carpet clean is to have it vacuumed at least once a week. This rule is mostly for carpets with light to medium traffic. However, carpets that receive heavy traffic should be vacuumed 3 to 5 times a week. Carpets that are vacuumed more frequently have a much longer life than those who are vacuumed seldomly. The more a carpet is vacuumed, the easier it is to avoid heavy buildup of grime and dirt deposits. This type of debris can damage the fibers of the Carpet Beavercreek offers.

Frequently cleaning your carpet won’t protect your carpet’s fibers unless it’s being cleaned efficiently. Many people make the mistake of simply passing the vacuum over their carpet briefly, and assuming that it’s clean. Carpet fibers tend to lay down and trap dirt and other deposits deep in the carpet. In order to get to this dirt, the carpet fibers need to be thoroughly lifted as you vacuum. Your carpet needs to be vacuumed thoroughly with several passes. You shouldn’t rush these passes. Each pass should be done slowly, so that the maximum amount of debris can be removed each time.

When carpets are extremely dirty, simply vacuuming may not get rid of the dirt. In this case, you may need to use a carpet washer. Carpet washers use water and carpet cleaning solutions to clean deep within the fibers. The washer thoroughly pumps the solution into the carpet’s fibers, loosening the dirt, and sucking up the dirty water that’s left. This helps to remove dirt that’s been trapped deep inside of the fibers, and leaves the carpet looking brand new. If you prefer not to do this yourself, you can hire cleaning services for Carpet Beavercreek has available.